▒▒ Welcome to KIMCO(Kyung In Machinery Co., ltd.) - Cooling Towers manufacturers ▒▒

If you click the picture, You can see a large picture.

MEX-KLSB

MEX-KLS is the product which designed MEX-KL TYPE getting from CTI performance certification with bases. This tower line was designed mainly for the installations at resident areas or crowded areas where the noise and water dispersion became critical issue.

*KT mark of Korean new technology.
*CTI(Cooling Technology Institute) certification for thermal performance.

High efficient in fill			Nozzle sprayed water tend to flow inwardly by the airflow and the bottom corners become a dead areas of heat transfer. Our newly designed fill and its pitch arrangement technology minimize this drag and so increase the total thermal performance.

Dual water distribution system			In addition to spray nozzle, another water dispersion system installed in between nozzle and fill banks.

WIDE AIR TRAVEL			Maximize the fill width for tower size.

The optimum design of air fluid			Remove DEAD AREA of air fluid, and raise efficiency by the optimum contrariety of FAN and FILL.

High efficient FAN			High efficiency aluminum fan blades-pultruded and hollow inside.

The others			Adopt FAN CYLINDER formal PRESSURE RECOVERY FLARE.

Noise Level Table

ITEM MODEL				MEX- 250KLS	MEX- 300KLS	MEX- 350KLS	MEX- 400KLS	MEX- 500KLS	MEX- 600KLS	MEX- 700KLS	MEX- 800KLS
Capacity	Cooling Capacity		CRT	250	300	350	400	500	600	700	800
	Heat Load		Kcal/h	975 x 10³	1170 x 10³	1365 x 10³	1560 x 10³	1950 x 10³	2340 x 10³	2730 x 10³	3120 x 10³
	Circulating Water		㎥/h	195	234	273	312	390	468	546	624
	Hot Water Temp.		℃	37
	Cold Water Temp.		℃	32
	Entering Wet Bulb Temp.		℃	27
Overall Dimension	Length(L)		mm	2400		2800		4800		5600
	Width(W)		mm	4870		5270		4870		5270
	Overall Height		mm	3500		3650	4375	3500		3650	4375
	Height (Up to Fan Deck)		mm	2770			3495	2770			3495
Materials	Casing/Partition			F.R.P
	Frame Members			H.D.G STEEL
	Filling			P.V.C(INTEGRAL TYPE/COMBINED WITH LOUVER & ELIMINATOR)
	Louver/Eliminators			P.V.C
	Distribution Panel			F.R.P
	Cold Water Basin			F.R.P
	Fan Blade/Hub			ALUMINUM or FRP / H.D.G STEEL or AL. ALLOY
	Fan Stack			F.R.P
Fan Assembly	Fan	Type		AXIAL FLOW
		Diameter	mm	2000 x 1		2400 x 1		2000 x 2		2400 x 2
		Number of Blade	ea	4
		Driver System		V - BELT DRIVER
		Air Volume	?/min	1515	1734	1870	2140	3030	3468	3740	4280
	Motor	Type		T.E.F.C CL. F IP54
		Power Source		3PH / 60HZ / 220V (380V / 440V)
		Rated Output	kw	7.5 x 1	11 x 1	15 x 1		7.5 x 2	11 x 2	15 x 2
	Quantity			1				2
Distribution System				OPEN GRAVITY FALL
Piping Diameter	Hot Water inlet (hole)			125A x 2			150A x 2	125A x 4			150A x 4
	Cold Water Outlet			200A x 1			250A x 1	200A x 2			250A x 2
	Drain Pipe			80A x 1				80A x 2
	Overflow Pipe			80A x 1				80A x 2
	Make-up, Auto			32A x 1			50A x 1	32A x 2			50A x 2
	Make-up, Manual			32A x 1			50A x 1	32A x 2			50A x 2
	Flange Rating			KS 10K. FF
Make up	Evaporation Loss		%	0.83
	Drift Loss		%	LESS THAN 0.02
Weight	Shipping Weight		kg	1620	1673	2230	2645	3240	3346	4460	5290
	Operating Weight		kg	4260	4373	5600	6265	8520	8746	11200	12530
Internal Head Loss			m	0m AT WATER INLET HOLE
Water Storage Capacity			l	2000	2000	2400	2400	4000	4000	4800	4800

PLEASE NOTE THAT THESE INFORMATIONS MAY BE CHANGED WITHOUT NOTICE

ITEM MODEL				MEX- 900KLS	MEX- 1000KLS	MEX- 1200KLS	MEX- 1400KLS	MEX- 1600KLS	MEX- 1750KLS	MEX- 2000KLS
Capacity	Cooling Capacity		CRT	900	1000	1200	1400	1600	1750	2000
	Heat Load		Kcal/h	3510 x 10³	3900 x 10³	4680 x 10³	5460 x 10³	6240 x 10³	6825 x 10³	7800 x 10³
	Circulating Water		㎥/h	702	780	936	1092	1248	1365	1560
	Hot Water Temp.		℃	37
	Cold Water Temp.		℃	32
	Entering Wet Bulb Temp.		℃	27
Overall Dimension	Length(L)		mm	7200	8400		11200		14000
	Width(W)		mm	4870	5270		5270		5270
	Overall Height		mm	3500	3650	4375	3650	4375	3650	4375
	Height (Up to Fan Deck)		mm	2770		3495	2770	3495	2770	3495
Materials	Casing/Partition			F.R.P
	Frame Members			H.D.G STEEL
	Filling			P.V.C(INTEGRAL TYPE/COMBINED WITH LOUVER & ELIMINATOR)
	Louver/Eliminators			P.V.C
	Distribution Panel			F.R.P
	Cold Water Basin			F.R.P
	Fan Blade/Hub			ALUMINUM or FRP / H.D.G STEEL or AL. ALLOY
	Fan Stack			F.R.P
Fan Assembly	Fan	Type		AXIAL FLOW
		Diameter	mm	2000 x 3	2400 x 3		2400 x 4		2400 x 5
		Number of Blade	ea	4
		Driver System		V - BELT DRIVER
		Air Volume	?/min	5202	5610	6420	7480	8560	9350	10700
	Motor	Type		T.E.F.C CL. F IP54
		Power Source		3PH / 60HZ / 220V (380V / 440V)
		Rated Output	kw	11 x 3	15 x 3		15 x 4		15 x 5
	Quantity			3			4		5
Distribution System				OPEN GRAVITY FALL
Piping Diameter	Hot Water inlet (hole)			125A x 6		150A x 6	125A x 8	150A x 8	125A x 10	150A x 10
	Cold Water Outlet			200A x 3		250A x 3	200A x 4	250A x 4	200A x 5	250A x 5
	Drain Pipe			80A x 3			80A x 4		80A x 5
	Overflow Pipe			80A x 3			80A x 4		80A x 5
	Make-up, Auto			32A x 3		50A x 3	32A x 4	50A x 4	32A x 5	50A x 5
	Make-up, Manual			32A x 3		50A x 3	32A x 4	50A x 4	32A x 5	50A x 5
	Flange Rating			KS 10K. FF
Make up	Evaporation Loss		%	0.83
	Drift Loss		%	LESS THAN 0.02
Weight	Shipping Weight		kg	5019	6690	7935	8920	10580	11150	13225
	Operating Weight		kg	13119	16800	18795	22400	25060	28000	31325
Internal Head Loss			m	0m AT WATER INLET HOLE
Water Storage Capacity			l	6000	7200	7200	9600	9600	12000	12000

PLEASE NOTE THAT THESE INFORMATIONS MAY BE CHANGED WITHOUT NOTICE

Noise Level Table

UNIT : dB(A)

Measuring point		①	②	③	④	⑤	⑥	Measuring point? Dm
Measuring distance		Dm	2m	5m	10m	20m	45° upper
Model	Direction	Dm	2m	5m	10m	20m	Dfm
MEX-250KLS	W/L	63/56	63/59	60/55	55.5/50	50/44.5	68/68	2.4/4.87
MEX-300KLS	W/L	67/58	67/62	64/58	59/54	53/48	73/71	2.4/4.87
MEX-350KLS	W/L	67/59	68/63	64/59	60/55	54/49	74/72	2.8/5.27
MEX-400KLS	W/L	67/59	68/63	64/59	60/55	54/49	74/72	2.8/5.27
MEX-500KLS	W/L	61/56	64/60	61/56	56/51	51/46	69/68	4.8/5.27
MEX-600KLS	W/L	65/59	68/63	65/59	60/55	54/49	74/71	4.8/4.87
MEX-700KLS	W/L	64.5/60	69/64	65/60	61/56	55/50	75/72	5.6/4.87
MEX-800KLS	W/L	64.5/60	69/64	65/60	61/56	55/50	75/72	5.6/5.27
MEX-900KLS	W/L	60/57	65/61	62/57	56/52	52/47	70/69	7.2/5.27
MEX-1000KLS	W/L	63/61	70/65	66/61	61/57	56/51	76/73	8.4/4.87
MEX-1200KLS	W/L	63/61	70/65	66/61	61/57	56/51	76/73	8.4/5.27
MEX-1400KLS	W/L	61/61	71/65	67/61	62/57	57/51	77/74	11.2/5.27
MEX-1600KLS	W/L	61/61	71/65	67/61	62/57	57/51	77/74	11.2/5.27
MEX-1750KLS	W/L	60/62	72/66	67/62	63/58	57/52	77/75	14.0/5.27
MEX-2000KLS	W/L	60/62	72/66	67/62	63/58	57/52	77/75	14.0/5.27

PLEASE NOTE THAT THESE INFORMATIONS MAY BE CHANGED WITHOUT NOTICE

List